Masonry Reinforcement Ancon AMR – 3mm x 60mm x 2700mm – Pack of 20

£43.85 Ex. VAT. - £52.62 Inc. VAT.

Ancon AMR ‘Ladder Type’ Masonry Reinforcement is a fabricated steel reinforcement system that is located in the bed joint to strengthen masonry panels without thickening the wall.

The longitudinal steel wires are flattened to ensure good mortar cover even when lapped or used with wall ties. Cross wires are welded in the same plane as the main wires at 450mm centres.

Standard configurations suit a wide range of structural load conditions and wall widths. Product selection is based on calculation.

The longitudinal wires have a minimum characteristic yield strength of 500N/mm². AMR meets the requirements of BS EN 845-3: 2003.

This product is supplied with a CE marking to demonstrate compliance with BS EN 845: Part 3.
Product Widths

  • 60, 100, 150, 175mm
    For use in wall widths from 100mm to 215mm.
SKU: GA-2020-10-21 Category:

Description

Ancon AMR ‘Ladder Type’ Masonry Reinforcement is a fabricated steel reinforcement system that is located in the bed joint to strengthen masonry panels without thickening the wall.

The longitudinal steel wires are flattened to ensure good mortar cover even when lapped or used with wall ties. Cross wires are welded in the same plane as the main wires at 450mm centres.

Standard configurations suit a wide range of structural load conditions and wall widths. Product selection is based on calculation.

The longitudinal wires have a minimum characteristic yield strength of 500N/mm². AMR meets the requirements of BS EN 845-3: 2003.

This product is supplied with a CE marking to demonstrate compliance with BS EN 845: Part 3.
Product Widths

  • 60, 100, 150, 175mm
    For use in wall widths from 100mm to 215mm.

Additional information

Dimensions 2700 × 60 × 3 mm
Brand

Length

Material

Product Type

Thickness